Powrliner 850 is the most trusted stripe liner machine because of its reliability and durability. People who are busy contractors for heavy striping projects, such as roads, parking lots, airports, sports courts, and warehouses, buy this machine for themselves.
A professional in any field is always well aware of the best equipment available for their job in the market, and so are the stripe line contractors. But in addition to just being fond of the powrliner, they need to know maintenance and troubleshooting tips for their machine so that they don’t fail any project.
Machine Not Starting
Have you ever undergone a situation where you are enthusiastic about any of your projects, but as soon as you start your machine, the utter disappointment starts because your machine will not start?
This could be due to one of the following reasons:
- Your machine is short of fuel to get started, or you might have forgotten to open the fuel valve.
- Your air filter may be clogged with dust or impurities that may not let the required air through the pump for the machine to start.
So, in order to avoid this last-minute hassle, you should properly maintain your machine and leave it uncleaned because any leftover paint may dry up inside and clog the 850 line striping equipment parts.
Uneven or Weak Lines
Damaged seals, clogged filters, or the wrong spray tip can disrupt the pattern and quality of your lines. Therefore, you must choose the correct nozzle size based on the project and stay aware of your equipment.You should also maintain your spray tips properly to prevent messy or uneven lines.
Low Pressure or No Spray
Imagine having your tank full of paint, but when you start your machine, you don’t get the paint spray with pressure. This may happen if the paint has started to dry up inside the machine, or sometimes you might have judged it wrong about the paint quantity left in the tank. Both these reasons can disturb the pattern of the stripe lines and the efficiency of the machine.
Paint Leaking
Hoses can harden and crack over time, causing paint leaks that disrupt pressure and reduce stripe quality.Loose connections can also cause leaks, so check all fittings before starting your day and secure them properly.
Clogging from Dried Paint
If you don’t clean your machine regularly, the leftover paint will start drying up inside the machine, and it will start clogging the parts. You don’t need to clean the machine thoroughly every day, but you should clean the sprayer tips and nozzles daily and check if something is clogging the air filters and if anything needs immediate replacement.
Engine Overheating
If you have a big project and you are using it continuously for a long time, the pump will heat up. Remember that all machines need a little rest so they don’t get too heated to cause malfunctioning of the Powrliner.
Another reason could be oil levels, or maybe your engine requires an oil change. So, you should keep an eye on all these issues.
Poor Paint Flow
The paint flow can be affected for many reasons, such as a fold in any hose, clogging, or a loss of connection. It can also happen if the suction pump is not working properly, or if there is a fuel shortage or a need for an oil change.
The tips, if broken or clogged, may cause trouble; similarly, the filters may cause it as well.
Too Much Vibration Or Lost Control
You may lose control of your machine if you have not checked the wheels or connections. Sometimes a nut gets loose or needs tightening and may disturb the balance of the machine, causing vibration, which makes the control difficult.
Check and fix all the connections and wheels of your machine to avoid any such condition. Properly lubricate the parts after cleaning them thoroughly.
Wrap Up
You need to follow a proper maintenance routine in order to avoid any unfortunate conditions during your project. Take care of your machine like your beloved pet; only then can you make the most of it.
Keep an eye on the 850 line striping equipment parts replacement and stock your required parts beforehand to avoid any last-minute frustration.
Gain complete knowledge about all the parts and the cleaning routine so that you don’t need to go to a mechanic every time a problem occurs or your machine requires some service.
Make a habit of regular cleaning following a proper routine so that no paint gets a chance to clog the parts.